You are using Internet Explorer 11 or earlier, this browser is no longer supported by this website. We suggest to use a modern browser.

Aluminum

EN AW 6061A | Al Mg1SiCu(A)

On this page you can find the chemical and mechanical specifications of the alloy EN AW 6061A | Al Mg1SiCu(A).

Other dimensions and alloys are available on request.

Our aluminum specialists in Wörth are happy to advise you. We look forward to hearing from you.

Chemical composition [% max. or range]

SiFeCuMnMgCrNiZnTiGaV
0,40–0,80,70,15–0,400,150,8–1,20,04–0,350,250,15

Heat-treated condition T4 | EN AW 6061A

Mechanical properties

Nominal thickness
mm
Brinell hardness
HBW
Yield strength
Rp0,2 MPa
min./max.
Tensile strength
Rm MPa
min./max.
Elongation
A50
mm %
min.
Elongation
A %
min.
Bending radius
180° t
min.
Bending radius
90° t
min.
>= 0,4 - 1,558110205121,5 t1,0 t
1,5 - 358110205142,0 t1,5 t
3 - 658110205163,0 t
6 - 12,558110205184,0 t
12,5 - 405811020515
40 - 805811020514

Heat-treated condition T6 | EN AW 6061A

Mechanical properties

Nominal thickness
mm
Brinell hardness
HBW
Yield strength
Rp0,2 MPa
min./max.
Tensile strength
Rm MPa
min./max.
Elongation
A50
mm %
min.
Elongation
A %
min.
Bending radius
180° t
min.
Bending radius
90° t
min.
>= 0,4 - 1,58824029062,5 t
1,5 - 38824029073,5 t
3 - 688240290104,0 t
6 - 12,58824029095,0 t
12,5 - 40882402908
40 - 80882402906
80 - 100882402905
100 - 150842402755
150 - 250812302654
250 - 350802202604
350 - 400802202602