You are using Internet Explorer 11 or earlier, this browser is no longer supported by this website. We suggest to use a modern browser.

Aluminum

EN AW 7075 | Al Zn5,5MgCu

On this page you can find the chemical and mechanical specifications of the alloy EN AW 7075 | Al Zn5,5MgCu.

Other dimensions and alloys are available on request.

Our aluminum specialists in Wörth are happy to advise you. We look forward to hearing from you.

Chemical composition [% max. oder range]

SiFeCuMnMgCrNiZnTiGaV
0,40,51,2–2,00,32,1–2,90,18–0,285,1–6,10,2

Heat-treated condition 0/H111 | EN AW 7075

Mechanical properties

Nominal thickness
mm
Brinell hardness
HBW
Yield strength
Rp0,2 MPa
min./max.
Tensile strength
Rm MPa
min./max.
Elongation
A50
mm %
min.
Elongation
A %
min.
Bending radius
180° t
min.
Bending radius
90° t
min.
>= 0,4 - 0,855145-275101,0 t0,5 t
0,8 - 1,555145 - 275102,0 t1,0 t
1,5 - 355145 - 275103,0 t1,0 t
3 - 655145 - 275102,5 t
6 - 12,555145 - 275104,0 t
12,5 - 7555 - 2759

Heat-treated condition T6 | EN AW 7075

Mechanical properties

Nominal thickness
mm
Brinell hardness
HBW
Yield strength
Rp0,2 MPa
min./max.
Tensile strength
Rm MPa
min./max.
Elongation
A50
mm %
min.
Elongation
A %
min.
Bending radius
180° t
min.
Bending radius
90° t
min.
>= 0,4 - 0,815746052564,5 t
0,8 - 1,516046054065,5 t
1,5 - 316147054076,5 t
3 - 616347554588,0 t
6 - 12,5160460540812,0 t
12,5 - 251614705406
25 - 501584605305
50 - 601554405254
60 - 801474204954
80 - 901443904904
90 - 1001353604603
100 - 1201193004102
120 - 1501042603602
150 - 2002403602
200 - 3002203601