tk accelis
Processing Europe
Processing Europe
/thyssenkrupp_logo_claim_d.svg){kind=logo}
/thyssenkrupp_logo_t.svg){kind=logo}
EN AW 1050A | Al 99.5
On this page you can find the chemical and mechanical specifications of the alloy EN AW 1050A | Al 99.5.
Other dimensions and alloys are available on request.
Our aluminum specialists in Mannheim are happy to advise you. EN AW 1050A - send request!
Chemical composition [% max. or range]
| Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn | Ti | Ga | V |
| 0.25 | 0.40 | 0.05 | 0.05 | 0.05 | - | - | 0.07 | 0.05 | - | - |
EN AW 1050A | Al 99.5: Heat-treated condition O/H111
Mechanical properties
| Nominal thickness mm | Brinell hardness HBW | Yield strength Rp0,2 MPa min./max. | Tensile strength Rm MPa min./max. | Elongation A50 mm % min. | Elongation A % min. | Bending radius 180° t min. | Bending radius 90° t min. |
| 0.2 - 0.5 | 20 | 20 | 65-95 | 20 | - | 0 | 0 |
| 0.5 -1.5 | 20 | 20 | 65-95 | 22 | 0 | 0 | |
| 1.5 - 3.0 | 20 | 20 | 65-95 | 26 | 0 | 0 | |
| 3.0 - 6.0 | 20 | 20 | 65-95 | 29 | 0.5 | 0.5 | |
| 6.0 - 12.5 | 20 | 20 | 65-95 | 35 | 1 | 1 | |
| 12.5 - 80.0 | 20 | 20 | 65-95 | 32 |
EN AW 1050A | Al 99.5: Heat-treated conditions H19
Mechanical properties
| Nominal thickness mm | Brinell hardness HBW | Yield strength Rp0,2 MPa min./max. | Tensile strength Rm MPa min./max. | Elongation A50 mm % min. | Elongation A % min. | Bending radius 180° t min. | Bending radius 90° t min. |
| 0.2 - 0.5 | 45 | 140 | 155 | 1 | |||
| 0.5 - 1.5 | 45 | 130 | 150 | 1 | |||
| 1.5 - 3.0 | 45 | 130 | 150 | 1 |
EN AW 1050A | Al 99.5: Heat-treated conditions H22
Mechanical properties
| Nominal thickness mm | Brinell hardness HBW | Yield strength Rp0,2 MPa min./max. | Tensile strength Rm MPa min./max. | Elongation A50 mm % min. | Elongation A % min. | Bending radius 180° t min. | Bending radius 90° t min. |
| 0.2 - 0.5 | 27 | 55 | 85 - 125 | 4 | - | 0.5 | 0 |
| 0.5 -1.5 | 27 | 55 | 85 - 125 | 5 | 0.5 | 0 | |
| 1.5 - 3.0 | 27 | 55 | 85 - 125 | 6 | 0.5 | 0.5 | |
| 3.0 - 6.0 | 27 | 55 | 85 - 125 | 11 | 1 | 1 | |
| 6.0 - 12.5 | 27 | 55 | 85 - 125 | 12 | 2 |
EN AW 1050A | Al 99.5: Heat-treated condition H24
Mechanical properties
| Nominal thickness mm | Brinell hardness HBW | Yield strength Rp0,2 MPa min./max. | Tensile strength Rm MPa min./max. | Elongation A50 mm % min. | Elongation A % min. | Bending radius 180° t min. | Bending radius 90° t min. |
| 0.2 - 0.5 | 33 | 75 | 105 - 145 | 3 | 1 | 0 | |
| 0.5 -1.5 | 33 | 75 | 105 - 145 | 4 | 1 | 0.5 | |
| 1.5 - 3.0 | 33 | 75 | 105 - 145 | 5 | 1 | 1 | |
| 3.0 - 6.0 | 33 | 75 | 105 - 145 | 8 | 1.5 | 1.5 | |
| 6.0 - 12.5 | 33 | 75 | 105 - 145 | 8 | 2.5 |
Your product of choice: EN AW 1050A | Al 99.5
Other dimensions and alloys are available on request.
All alloys comply with OEM standards and are available with EDT surfaces, dry lubricants and passivation. Slit strip, sheet and small coils are provided with intermediate paper layers and/or protective film on one or both sides in accordance with the customer's specifications.