/thyssenkrupp_logo_claim_d.svg){kind=logo}
/thyssenkrupp_logo_t.svg){kind=logo}
EN AW 1200A | Al 99
On this page you can find the chemical and mechanical specifications of the alloy EN AW 1200A | Al 99.
Other dimensions and alloys are available on request.
Our aluminum specialists in Mannheim are happy to advise you. EN AW 1200A - send request!
Chemical composition [% max. oder range]
| Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn | Ti | Ga | V |
| 1.00 | 1.00 | 0.1 | 0.3 | 0.3 | 0.1 | — | 0.1 | — | — | — |
EN AW 1200A | Al 99: Heat-treated condition H111
Mechanical properties
| Nominal thickness mm | Brinell hardness HBW | Yield strength Rp0,2 MPa min./max. | Tensile strength Rm MPa min./max. | Elongation A50 mm % min. | Elongation A % min. | Bending radius 180° t min. | Bending radius 90° t min. |
| 0.2 - 0.5 | 23 | 25 | 75 - 105 | 19 | 0 t | 0 t | |
| 0.5 - 1.5 | 23 | 25 | 75 - 105 | 21 | 0 t | 0 t | |
| 1.5 - 3 | 23 | 25 | 75 - 105 | 24 | 0 t | 0 t | |
| 3 - 6 | 23 | 25 | 75 - 105 | 28 | 0.5 t | 0.5 t | |
| 6 - 12.5 | 23 | 25 | 75 - 105 | 33 | 1.0 t | 1.0 t | |
| 12.5 - 80 | 23 | 25 | 75 - 105 | 30 |
EN AW 1200A | Al 99: Heat-treated condition H22
Mechanical properties
| Nominal thickness mm | Brinell hardness HBW | Yield strength Rp0,2 MPa min./max. | Tensile strength Rm MPa min./max. | Elongation A50 mm % min. | Elongation A % min. | Bending radius 180° t min. | Bending radius 90° t min. |
| 0.2 - 0.5 | 30 | 65 | 95 - 135 | 4 | 0.5 t | 0 t | |
| 0.5 - 1.5 | 30 | 65 | 95 - 135 | 5 | 0.5 t | 0 t | |
| 1.5 - 3 | 30 | 65 | 95 - 135 | 6 | 0.5 t | 0.5 t | |
| 3 - 6 | 30 | 65 | 95 - 135 | 10 | 1.0 t | 1.0 t | |
| 6 - 12.5 | 30 | 65 | 95 - 135 | 10 | 2.0 t |
EN AW 1200A | Al 99: Heat-treated condition H24
Mechanical properties
| Nominal thickness mm | Brinell hardness HBW | Yield strength Rp0,2 MPa min./max. | Tensile strength Rm MPa min./max. | Elongation A50 mm % min. | Elongation A % min. | Bending radius 180° t min. | Bending radius 90° t min. |
| 0.2 - 0.5 | 37 | 90 | 115 - 155 | 3 | 1.0 t | 0 t | |
| 0.5 - 1.5 | 37 | 90 | 115 - 155 | 4 | 1.0 t | 0.5 t | |
| 1.5 - 3 | 37 | 90 | 115 - 155 | 5 | 1.0 t | 1.0 t | |
| 3 - 6 | 37 | 90 | 115 - 155 | 7 | 1.5 t | ||
| 6 - 12.5 | 36 | 85 | 115 - 155 | 9 | 2.5 t |