EN AW 3003 | Al Mn1Cu

Aluminum tk accelis

On this page you can find the chemical and mechanical specifications of the alloy EN AW 3003 | Al Mn1Cu.

Other dimensions and alloys are available on request.

Our aluminum specialists in Mannheim are happy to advise you. EN AW 3003 - send request!

Chemical composition [% max. or range]

Si	Fe	Cu	Mn	Mg	Cr	Ni	Zn	Ti	Ga	V
0.6	0.7	0.05–0.20	1.0–1.5	—	—	—	0.1	—	—	—

EN AW 3003 | Al Mn1Cu: Heat-treated condition 0/H111

Mechanical properties

Nominal thickness mm	Brinell hardness HBW	Yield strength R_p0,2 MPa min./max.	Tensile strength R_m MPa min./max.	Elongation A₅₀ _mm % min.	Elongation A % min.	Bending radius 180° t min.	Bending radius 90° t min.
0.2 - 0.5	28	35	95 - 135	15		0 t	0 t
0.5 - 1.5	28	35	95 - 135	17		0 t	0 t
1.5 - 3	28	35	95 - 135	20		0 t	0 t
3 - 6	28	35	95 - 135	23		1.0 t	1.0 t
6 - 12.5	28	35	95 - 135	24			1.5 t

EN AW 3003 | Al Mn1Cu: Heat-treated condition H22

Mechanical properties

Nominal thickness mm	Brinell hardness HBW	Yield strength R_p0,2 MPa min./max.	Tensile strength R_m MPa min./max.	Elongation A₅₀ _mm % min.	Elongation A % min.	Bending radius 180° t min.	Bending radius 90° t min.
0.2 - 0.5	37	80	120 - 160	6		1.0 t	0 t
0.5 - 1.5	37	80	120 - 160	7		1.0 t	0.5 t
1.5 - 3	37	80	120 - 160	8		1.0 t	1.0 t
3 - 6	37	80	120 - 160	9			1.0 t
6 - 12.5	37	80	120 - 160	11			2.0 t

EN AW 3003 | Al Mn1Cu: Heat-treated condition H24

Mechanical properties

Nominal thickness mm	Brinell hardness HBW	Yield strength R_p0,2 MPa min./max.	Tensile strength R_m MPa min./max.	Elongation A₅₀ _mm % min.	Elongation A % min.	Bending radius 180° t min.	Bending radius 90° t min.
0.2 - 0.5	45	115	145 - 185	4		1.5 t	0.5 t
0.5 - 1.5	45	115	145 - 185	4		1.5 t	1.0 t
1.5 - 3	45	115	145 - 185	5		1.5 t	1.0 t
3 - 6	45	115	145 - 185	6			2.0 t
6 - 12.5	45	110	145 - 185	8			2.5 t

Your product of choice: EN AW 3003 | Al Mn1Cu