EN AW 3005A | Al Mn1Mg0.5(A)

On this page you can find the chemical and mechanical specifications of the alloy EN AW 3005A | Al Mn1Mg0,5(A).

Other dimensions and alloys are available on request.

Our aluminum specialists in Mannheim are happy to advise you. EN AW 3005A - send request!

Si	Fe	Cu	Mn	Mg	Cr	Ni	Zn	Ti	Ga	V
0.7	0.8	0.3	1.0–1.5	0.20–0.6	0.1	—	0.4	0.1	—	—

EN AW 3005A | Al Mn1Mg0.5(A): Heat-treated condition 0/H111

Nominal thickness mm	Brinell hardness HBW	Yield strength R_p0,2 MPa min./max.	Tensile strength R_m MPa min./max.	Elongation A₅₀ _mm % min.	Elongation A % min.	Bending radius 180° t min.	Bending radius 90° t min.
0.2 - 0.5	33	45	115 - 165	12		0 t	0 t
0.5 - 1.5	33	45	115 - 165	14		0 t	0 t
1.5 - 3	33	45	115 - 165	16		1.0 t	0.5 t
3 - 6	33	45	115 - 165	19			1.0 t

Nominal thickness mm	Brinell hardness HBW	Yield strength R_p0,2 MPa min./max.	Tensile strength R_m MPa min./max.	Elongation A₅₀ _mm % min.	Elongation A % min.	Bending radius 180° t min.	Bending radius 90° t min.
0.2 - 0.5	45	110	145 - 195	5		1.0 t	0 t
0.5 - 1.5	45	110	145 - 195	5		1.0 t	0.5 t
1.5 - 3	45	110	145 - 195	6		1.5 t	1.0 t
3 - 6	45	110	145 - 195	7			1.5 t

Nominal thickness mm	Brinell hardness HBW	Yield strength R_p0,2 MPa min./max.	Tensile strength R_m MPa min./max.	Elongation A₅₀ _mm % min.	Elongation A % min.	Bending radius 180° t min.	Bending radius 90° t min.
0.2 - 0.5	52	130	170 - 215	4		1.5 t	0.5 t
0.5 - 1.5	52	130	170 - 215	4		1.5 t	1.0 t
1.5 - 3	52	130	170 - 215	4			1.5 t