EN AW 5052 | Al Mg2.5

Aluminum tk accelis

On this page you can find the chemical and mechanical specifications of the alloy EN AW 5052 | Al Mg2.5.

Other dimensions and alloys are available on request.

Our aluminum specialists in Mannheim are happy to advise you. EN AW 5052 - send request!

Chemical composition [% max. or range]

Si	Fe	Cu	Mn	Mg	Cr	Ni	Zn	Ti	Ga	V
0.4	0.5	0.1	0.50–1.1	1.6–2.5	0.3	—	0.2	0.1	—	—

EN AW 5052 | Al Mg2.5: Heat-treated condition 0/H111

Mechanical properties

Nominal thickness mm	Brinell hardness HBW	Yield strength R_p0,2 MPa min./max.	Tensile strength R_m MPa min./max.	Elongation A₅₀ _mm % min.	Elongation A % min.	Bending radius 180° t min.	Bending radius 90° t min.
0.2 - 0.5	47	65	170 - 215	12		0 t	0 t
0.5 - 1.5	47	65	170 - 215	14		0 t	0 t
1.5 - 3	47	65	170 - 215	16		0.5 t	0.5 t
3 - 6	47	65	170 - 215	18			1.0 t
6 - 12.5	46	65	165 - 215	19			2.0 t
12.5 - 80	46	65	165 - 215		18

EN AW 5052 | Al Mg2.5: Heat-treated condition H14

Mechanical properties

Nominal thickness mm	Brinell hardness HBW	Yield strength R_p0,2 MPa min./max.	Tensile strength R_m MPa min./max.	Elongation A₅₀ _mm % min.	Elongation A % min.	Bending radius 180° t min.	Bending radius 90° t min.
0.2 - 0.5	69	180	230 - 280	3
0.5 - 1.5	69	180	230 - 280	3
1.5 - 3	69	180	230 - 280	4
3 - 6	69	180	230 - 280	4
6 - 12.5	69	180	230 - 280	5
12.5 - 25	69	180	230 - 280		4

EN AW 5052 | Al Mg2.5: Heat-treated condition H22

Mechanical properties

Nominal thickness mm	Brinell hardness HBW	Yield strength R_p0,2 MPa min./max.	Tensile strength R_m MPa min./max.	Elongation A₅₀ _mm % min.	Elongation A % min.	Bending radius 180° t min.	Bending radius 90° t min.
0.2 - 0.5	61	130	210 - 260	5		1.5 t	0.5 t
0.5 - 1.5	61	130	210 - 260	6		1.5 t	1.0 t
1.5 - 3	61	130	210 - 260	7		1.5 t	1.5 t
3 - 6	61	130	210 - 260	10			1.5 t
6 - 12.5	61	130	210 - 260	12			2.5 t
12.5 - 40	61	130	210 - 260		12

EN AW 5052 | Al Mg2.5: Heat-treated condition H24

Mechanical properties

Nominal thickness mm	Brinell hardness HBW	Yield strength R_p0,2 MPa min./max.	Tensile strength R_m MPa min./max.	Elongation A₅₀ _mm % min.	Elongation A % min.	Bending radius 180° t min.	Bending radius 90° t min.
0.2 - 0.5	67	150	230 - 280	4		2.0 t	0.5 t
0.5 - 1.5	67	150	230 - 280	5		2.0 t	1.5 t
1.5 - 3	67	150	230 - 280	6		2.0 t	2.0 t
3 - 6	67	150	230 - 280	7			2.5 t
6 - 12.5	67	150	230 - 280	9			3.0 t
12.5 - 25	67	150	230 - 280		9

EN AW 5052 | Al Mg2.5: Heat-treated condition H26

Mechanical properties

Nominal thickness mm	Brinell hardness HBW	Yield strength R_p0,2 MPa min./max.	Tensile strength R_m MPa min./max.	Elongation A₅₀ _mm % min.	Elongation A % min.	Bending radius 180° t min.	Bending radius 90° t min.
0.2 - 0.5	74	180	250 - 300	3			1.5 t
0.5 - 1.5	74	180	250 - 300	4			2.0 t
1.5 - 3	74	180	250 - 300	5			3.0 t
3 - 6	74	180	250 - 300	6			3.5 t

EN AW 5052 | Al Mg2.5: Heat-treated condition H28

Mechanical properties

Nominal thickness mm	Brinell hardness HBW	Yield strength R_p0,2 MPa min./max.	Tensile strength R_m MPa min./max.	Elongation A₅₀ _mm % min.	Elongation A % min.	Bending radius 180° t min.	Bending radius 90° t min.
0.2 - 0.5	81	210	270	3
0.5 - 1.5	81	210	270	3
1.5 - 3	81	210	270	4

Your product of choice: EN AW 5052 | Al Mg2.5