/thyssenkrupp_logo_claim_d.svg){kind=logo}
/thyssenkrupp_logo_t.svg){kind=logo}
EN AW 6016 | Al Si1.2Mg0.4
On this page you can find the chemical and mechanical specifications of the alloy EN AW 6016 | Al Si1.2Mg0.4.
Other dimensions and alloys are available on request.
Our aluminum specialists in Mannheim are happy to advise you. EN AW 6016 - send request!
EN AW 6016 | Al Si1.2Mg0.4: Chemical composition [% max. or range]
| Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn | Ti | Ga | V |
| 0.5 | 0.2 | 0.2 | 0.25–0.6 | 0.1 | — | 0 | 0.15 | — | — | — |
EN AW 6016 | Al Si1.2Mg0.4: Heat-treated condition T4
Mechanical properties
| Nominal thickness mm | Brinell hardness HBW | Yield strength Rp0,2 MPa min./max. | Tensile strength Rm MPa min./max. | Elongation A50 mm % min. | Elongation A % min. | Bending radius 180° t min. | Bending radius 90° t min. |
| >= 0.4 - 3 | 55 | 80 | 170 - 250 | 24 | 0.5 t | 0.5 t |
EN AW 6016 | Al Si1.2Mg0.4: Heat-treated condition T6
Mechanical properties
| Nominal thickness mm | Brinell hardness HBW | Yield strength Rp0,2 MPa min./max. | tensile strength Rm MPa min./max. | Elongation A50 mm % min. | Elongation A % min. | Bending radius 180° t min. | Bending radius 90° t min. |
| >= 0.4 - 3 | 80 | 180 | 260 - 300 | 10 |