EN AW 6061A | Al Mg1SiCu(A)

On this page you can find the chemical and mechanical specifications of the alloy EN AW 6061A | Al Mg1SiCu(A).

Other dimensions and alloys are available on request.

Our aluminum specialists in Mannheim are happy to advise you. EN AW 6061A - send request!

Si	Fe	Cu	Mn	Mg	Cr	Ni	Zn	Ti	Ga	V
0.40–0.8	0.7	0.15–0.40	0.15	0.8–1.2	0.04–0.35	—	0.25	0.15	—	—

EN AW 6061A | Al Mg1SiCu(A): Heat-treated condition T4

Nominal thickness mm	Brinell hardness HBW	Yield strength R_p0,2 MPa min./max.	Tensile strength R_m MPa min./max.	Elongation A₅₀ _mm % min.	Elongation A % min.	Bending radius 180° t min.	Bending radius 90° t min.
>= 0.4 - 1.5	58	110	205	12		1.5 t	1.0 t
1.5 - 3	58	110	205	14		2.0 t	1.5 t
3 - 6	58	110	205	16			3.0 t
6 - 12.5	58	110	205	18			4.0 t
12.5 - 40	58	110	205		15
40 - 80	58	110	205		14

Nominal thickness mm	Brinell hardness HBW	Yield strength R_p0,2 MPa min./max.	Tensile strength R_m MPa min./max.	Elongation A₅₀ _mm % min.	Elongation A % min.	Bending radius 180° t min.	Bending radius 90° t min.
>= 0.4 - 1.5	88	240	290	6			2.5 t
1.5 - 3	88	240	290	7			3.5 t
3 - 6	88	240	290	10			4.0 t
6 - 12.5	88	240	290	9			5.0 t
12.5 - 40	88	240	290		8
40 - 80	88	240	290		6
80 - 100	88	240	290		5
100 - 150	84	240	275		5
150 - 250	81	230	265		4
250 - 350	80	220	260		4
350 - 400	80	220	260		2