/thyssenkrupp_logo_claim_d.svg){kind=logo}
/thyssenkrupp_logo_t.svg){kind=logo}
EN AW 2017A | Al Cu4MgSi(A)
On this page you can find the chemical and mechanical specifications of the alloy EN AW 2017A | Al Cu4MgSi(A).
Other dimensions and alloys are available on request.
Our aluminum specialists in Mannheim are happy to advise you. EN AW 2017A - send request!
EN AW 2017A | Al Cu4MgSi(A): Heat-treated condition T4
Mechanical properties
| Nominal thickness mm | Brinell hardness HBW | Yield strength Rp0,2 MPa min./max. | Tensile strength Rm MPa min./max. | Elongation A50 mm % min. | Elongation A % min. | Bending radius 180° t min. | Bending radius 90° t min. |
| >= 0.4 - 1.5 | 110 | 245 | 390 | 14 | 3.0 t | 3.0 t | |
| 1.5 - 6 | 110 | 245 | 390 | 15 | 5.0 t | 5.0 t | |
| 6 - 12.5 | 111 | 260 | 390 | 13 | 8.0 t | ||
| 12.5 - 40 | 110 | 250 | 390 | 12 | |||
| 40 - 60 | 108 | 245 | 385 | 12 | |||
| 60 - 80 | 0 | 240 | 370 | 7 | |||
| 80 - 120 | 105 | 240 | 360 | 6 | |||
| 120 - 150 | 101 | 240 | 350 | 4 | |||
| 150 - 180 | 0 | 220 | 330 | 2 | |||
| 180 - 200 | 0 | 200 | 300 | 2 |
EN AW 2017A | Al Cu4MgSi(A): Chemical composition [% max. or range]
| Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn | Ti | Ga | V |
| 0.20–0.8 | 0.7 | 3.5–4.5 | 0.40–1.0 | 0.40–1.0 | 0.1 | — | 0,.5 | — | — | — |