EN AW 5083 | Al Mg4.5Mn0.7

On this page you can find the chemical and mechanical specifications of the alloy EN AW 5083 | Al Mg4,5Mn0,7.

Other dimensions and alloys are available on request.

Our aluminum specialists in Mannheim are happy to advise you. EN AW 5083 - send request!

EN AW 5083 | Al Mg4.5Mn0.7: Heat-treated condition 0/H111

Nominal thickness mm	Brinell hardness HBW	Yield strength R_p0,2 MPa min./max.	Tensile strength R_m MPa min./max.	Elongation A₅₀ _mm % min.	Elongation A % min.	Bending radius 180° t min.	Bending radius 90° t min.
0.2 - 0.5	75	125	275 - 350	11		1.0 t	0.5 t
0.5 - 1.5	75	125	275 - 350	12		1.0 t	1.0 t
1.5 - 3	75	125	275 - 350	13		1.5 t	1.0 t
3 - 6	75	125	275 - 350	15			1.5 t
6 - 12.5	75	115	270 - 345	16			2.5 t
12.5 - 50	75	115	270 - 345		15
50 - 80	73	115	270 - 345		14
80 - 120	70	110	260		12
120 - 200	69	105	255		12
200 - 250	69	95	250		10
250 - 300	69	90	245		9

Si	Fe	Cu	Mn	Mg	Cr	Ni	Zn	Ti	Ga	V
0.4	0.4	0.1	0.40–1.0	4.0–4.9	0.05–0.25	—	0.25	0.15	—	—

Nominal thickness mm	Brinell hardness HBW	Yield strength R_p0,2 MPa min./max.	Tensile strength R_m MPa min./max.	Elongation A₅₀ _mm % min.	Elongation A % min.	Bending radius 180° t min.	Bending radius 90° t min.
0.2 - 0.5	102	280	340 - 400	2
0.5 - 1.5	102	280	340 - 400	3
1.5 - 3	102	280	340 - 400	3
3 - 6	102	280	340 - 400	3
6 - 12.5	102	280	340 - 400	4
12.5 - 25	102	280	340 - 400		3

Nominal thickness mm	Brinell hardness HBW	Yield strength R_p0,2 MPa min./max.	Tensile strength R_m MPa min./max.	Elongation A₅₀ _mm % min.	Elongation A % min.	Bending radius 180° t min.	Bending radius 90° t min.
0.2 - 0.5	89	215	305 - 380	5		2.0 t	0.5 t
0.5 - 1.5	89	215	305 - 380	6		2.0 t	1.5 t
1.5 - 3	89	215	305 - 380	7		3.0 t	2.0 t
3 - 6	89	215	305 - 380	8			2.5 t
6 - 12.5	89	215	305 - 380	10			3.5 t
12.5 - 40	89	215	305 - 380		9

Nominal thickness mm	Brinell hardness HBW	Yield strength R_p0,2 MPa min./max.	Tensile strength R_m MPa min./max.	Elongation A₅₀ _mm % min.	Elongation A % min.	Bending radius 180° t min.	Bending radius 90° t min.
0.2 - 0.5	99	250	340 - 400	4			1.0 t
0.5 - 1.5	99	250	340 - 400	5			2.0 t
1.5 - 3	99	250	340 - 400	6			2.5 t
3 - 6	99	250	340 - 400	7			3.5 t
6 - 12.5	99	250	340 - 400	8			4.5 t
12.5 - 25	99	250	340 - 400		7

Nominal thickness mm	Brinell hardness HBW	Yield strength R_p0,2 MPa min./max.	Tensile strength R_m MPa min./max.	Elongation A₅₀ _mm % min.	Elongation A % min.	Bending radius 180° t min.	Bending radius 90° t min.
0.2 - 0.5	106	280	360 - 420	2
0.5 - 1.5	106	280	360 - 420	3
1.5 - 3	106	280	360 - 420	3
3 - 4	106	280	360 - 420	3