Hot-dip coated thin sheet

Dual-phase steel | HCT450X - HDT580X

Choose your hot-dip coated dual-phase steel here in grades HCT450X, HCT490X, HCT590X, HCT780X, HCT980X and HCT980XG.

The experts at our locations are happy to advise you. We look forward to hearing from you.

Properties according to DIN EN 10 346

Steel type, cold rolled

Short designationVDA239-100*Surface finishMaterial number
HCT450X-+Z, +ZF1.0937
HCT490XCR290Y490T-DP+Z, +ZF, +ZM1.0995
HCT590XCR330Y590T-DP+Z, +ZF, +ZM1.0996
HCT780XCR440Y780T-DP+Z, +ZF1.0943
HCT980XCR590Y980T-DP+Z, +ZF1.0944
HCT980XGCR700Y980T-DP+Z, +ZF1.0997

Mechanical properties, longitudinal

Short designationProof stress Rp0,2 MPaTensile strength Rm MPa min.Elongation at fracture A801)2) % min.Strain hardening exponent n10-UE min.Bake hardening index BH2 min.
HCT450X260-340450270,1630
HCT490X290-380490240,1530
HCT590X330-430590200,1430
HCT780X440-55078014-30
HCT980X590-74098010-30
HCT980XG700-8509808-30

Chemical composition, heat analysis

Percentage biy weight % max.
Short designationCSiMnPSAltotal (span)Cr+MoNb+TiVB
HCT450X0,140,752,000,0800,0150,015-1,01,000,150,200,005
HCT490X0,140,752,000,0800,0150,015-1,01,000,150,200,005
HCT590X0,150,752,500,0400,0150,015-1,51,400,150,200,005
HCT780X0,180,802,500,0800,0150,015-2,01,400,150,200,005
HCT980X0,201,002,900,0800,0150,015-2,01,400,150,200,005
HCT980XG0,231,002,900,0800,0150,015-2,01,400,150,200,005

1) Reduced minimum values of elongation at rupture apply to product thicknesses t < 0.60 mm (minus 2 units).
2) For ZF-coated, products the minimum values of elongation at fracture are reduced by 2 unites.
For ZF-coated in thicknesses t < 0.60 mm, the minimum elongation at rupture is reduced by 4 units.

* Comparative grade, therefore minor deviations from DIN EN values possible