You are using Internet Explorer 11 or earlier, this browser is no longer supported by this website. We suggest to use a modern browser.

Hot strip

S235J0 | 1.0114

Grade S235J0 has a minimum yield strength of 235 MPa. The impact energy at a test temperature of 0°C is at least 27 joules. Steels of grade S235J0 are suitable for low-stressed parts in steel and mechanical engineering with increased toughness and weldability.

Non-alloy/general structural steel

Properties according to DIN EN 10 025-2

Steel type

Short designationVDA239-100Material number
S235J0-1.0114

Mechanical properties, transverse 1)

Upper yield strength ReH MPa min.Tensile strength Rm MPaElongation at fracture A80 % min. Elongation at fracture A 5 %
min.
e ≤ 16 mme < 3 mm3 mm ≤ e ≤ 16 mme ≤ 1 mm1 mm < e ≤
1.5 mm
1.5 mm < e ≤ 2 mm2 mm < e ≤
2.5 mm
2.5 mm < e < 3 mm3 mm ≤ e < 16 mm
235360-510360–510151617181924

Chemical composition (heat analysis)

Percentage by weight % max.
CSiMnPSNCu
0.17-1.400.0300.0300.0120.55

1) As rolling widths ≥ 600 mm are primarily used, transverse values generally apply, refer to DIN EN 10 025-2.