You are using Internet Explorer 11 or earlier, this browser is no longer supported by this website. We suggest to use a modern browser.

Hot strip

S275J0 | 1.0143

Grade S275J0 has a minimum yield strength of 275 MPa. The impact energy at a test temperature of 0°C is at least 27 joules.

Non-alloy/general structural steel

Properties according to DIN EN 10 025-2

Steel type

Short designationVDA239-100Material number
S275J0-1.0143

Mechanical properties, transverse 1)

Upper yield strength ReH MPa min.Tensile strength Rm MPaElongation at fracture A80 % min.Elongation at fracture A 5 %
min.
e ≤ 16 mme < 3 mm3 mm ≤ e ≤ 16 mme ≤ 1 mm1 mm < e ≤
1.5 mm
1.5 mm < e ≤ 2 mm2 mm < e ≤
2.5 mm
2.5 mm < e < 3 mm3 mm ≤ e < 16 mm
275430–580410–560131415161721

Chemical composition (heat analysis)

Percentage by weight % max.
CSiMnPSNCu
0.18-1.500.0300.0300.0120.55

1) As rolling widths ≥ 600 mm are primarily used, transverse values generally apply, refer to DIN EN 10 025-2.