You are using Internet Explorer 11 or earlier, this browser is no longer supported by this website. We suggest to use a modern browser.

Hot strip

S355J2 | 1.0577

Grade S355J2 has a minimum yield strength of 355 MPa. The impact energy at a test temperature of -20°C is at least 27 joules.

Non-alloy/general structural steel

Properties according to DIN EN 10 025-2

Steel type

Short designationVDA239-100Material number
S355J2-1.0577

Mechanical properties, transverse 1)

Upper yield strength ReH MPa min.Tensile strength Rm MPaElongation at fracture A80 % min.Elongation at fracture A 5 %
min.
e ≤ 16 mme < 3 mm3 mm ≤ e ≤ 16 mme ≤ 1 mm1 mm < e ≤
1.5 mm
1.5 mm < e ≤ 2 mm2 mm < e ≤
2.5 mm
2.5 mm < e < 3 mm3 mm ≤ e < 16 mm
355510–680470–630121314151620

Chemical composition (heat analysis)

Percentage by weight % max.
CSiMnPSNCu
0.200,551.600.0250.025-0.55

1) As rolling widths ≥ 600 mm are primarily used, transverse values generally apply, refer to DIN EN 10 025-2.