You are using Internet Explorer 11 or earlier, this browser is no longer supported by this website. We suggest to use a modern browser.

Aluminium

EN AW 1050A | Al 99,5

On this page you can find the chemical and mechanical specifications of the alloy EN AW 1050A | Al 99,5.

Other dimensions and alloys are available on request.

Our aluminum specialists in Wörth are happy to advise you. We look forward to hearing from you.

Chemical composition [% max. or range]

SiFeCuMnMgCrNiZnTiGaV
0,250,400,050,050,05--0,070,05--

Heat-treated condition O/H111 | EN AW 1050A

Mechanical properties

Nominal thickness mmBrinell hardness HBWYield strength Rp0,2 MPa min./max.Tensile strength Rm MPa min./max.Elongation A50 mm % min.Elongation A % min.Bending radius 180° t min.Bending radius 90° t min.
0,2 - 0,5202065-9520-00
0,5 -1,5202065-952200
1,5 - 3,0202065-952600
3,0 - 6,0202065-95290,50,5
6,0 - 12,5202065-953511
12,5 - 80,0202065-9532

Heat-treated conditions H19 | EN AW 1050A

Mechanical properties

Nominal thickness
mm
Brinell hardness
HBW
Yield strength
Rp0,2 MPa
min./max.
Tensile strength
Rm MPa
min./max.
Elongation
A50
mm %
min.
Elongation
A %
min.
Bending radius
180° t
min.
Bending radius
90° t
min.
0,2 - 0,5451401551
0,5 - 1,5451301501
1,5 - 3451301501

Heat-treated conditions H22 | EN AW 1050A

Mechanical properties

Nominal thickness mmBrinell hardness HBWYield strength Rp0,2 MPa min./max.Tensile strength Rm MPa min./max.Elongation A50 mm % min.Elongation A % min.Bending radius 180° t min.Bending radius 90° t min.
0,2 - 0,5275585 - 1254-0,50
0,5 -1,5275585 - 12550,50
1,5 - 3,0275585 - 12560,50,5
3,0 - 6,0275585 - 1251111
6,0 - 12,5275585 - 125122

Heat-treated condition H24 | EN AW 1050A

Mechanical properties

Nominal thickness mmBrinell hardness HBWYield strength Rp0,2 MPa min./max.Tensile strength Rm MPa min./max.Elongation A50 mm % min.Elongation A % min.Bending radius 180° t min.Bending radius 90° t min.
0,2 - 0,53375105 - 145310
0,5 -1,53375105 - 145410,5
1,5 - 3,03375105 - 145511
3,0 - 6,03375105 - 14581,51,5
6,0 - 12,53375105 - 14582,5

Other dimensions and alloys are available on request.

All alloys comply with OEM standards and are available with EDT surfaces, dry lubricants and passivation. Slit strip, sheet and small coils are provided with intermediate paper layers and/or protective film on one or both sides in accordance with the customer's specifications.