You are using Internet Explorer 11 or earlier, this browser is no longer supported by this website. We suggest to use a modern browser.

Aluminum

EN AW 3005A | Al Mn1Mg0,5(A)

On this page you can find the chemical and mechanical specifications of the alloy EN AW 3005A | Al Mn1Mg0,5(A).

Other dimensions and alloys are available on request.

Our aluminum specialists in Wörth are happy to advise you. We look forward to hearing from you.

Chemical composition [% max. or range]

SiFeCuMnMgCrNiZnTiGaV
0,70,80,31,0–1,50,20–0,60,10,40,1

Heat-treated condition 0/H111 | EN AW 3005A

Mechanical properties

Nominal thickness
mm
Brinell hardness
HBW
Yield strength
Rp0,2 MPa
min./max.
Tensile strength
Rm MPa
min./max.
Elongation
A50
mm %
min.
Elongation
A %
min.
Bending radius
180° t
min.
Bending radius
90° t
min.
0,2 - 0,53345115 - 165120 t0 t
0,5 - 1,53345115 - 165140 t0 t
1,5 - 33345115 - 165161,0 t0,5 t
3 - 63345115 - 165191,0 t

Heat-treated condition H22 | EN AW 3005A

Mechanical properties

Nominal thickness
mm
Brinell hardness
HBW
Yield strength
Rp0,2 MPa
min./max.
Tensile strength
Rm MPa
min./max.
Elongation
A50
mm %
min.
Elongation
A %
min.
Bending radius
180° t
min.
Bending radius
90° t
min.
0,2 - 0,545110145 - 19551,0 t0 t
0,5 - 1,545110145 - 19551,0 t0,5 t
1,5 - 345110145 - 19561,5 t1,0 t
3 - 645110145 - 19571,5 t

Heat-treated condition H24 | EN AW 3005A

Mechanical properties

Nominal thickness
mm
Brinell hardness
HBW
Yield strength
Rp0,2 MPa
min./max.
Tensile strength
Rm MPa
min./max.
Elongation
A50
mm %
min.
Elongation
A %
min.
Bending radius
180° t
min.
Bending radius
90° t
min.
0,2 - 0,552130170 - 21541,5 t0,5 t
0,5 - 1,552130170 - 21541,5 t1,0 t
1,5 - 352130170 - 21541,5 t