You are using Internet Explorer 11 or earlier, this browser is no longer supported by this website. We suggest to use a modern browser.

Aluminum

EN AW 3103A | Al Mn1(A)

On this page you can find the chemical and mechanical specifications of the alloy EN AW 3103A | Al Mn1(A).

Other dimensions and alloys are available on request.

Our aluminum specialists in Wörth are happy to advise you. We look forward to hearing from you.

Chemical composition [% max. or range]

SiFeCuMnMgCrNiZnTiGaV
0,50,70,10,7–1,40,30,10,20,1

Heat-treated condition 0/H111 | EN AW 3103A

Mechanical properties

Nominal thickness
mm
Brinell hardness
HBW
Yield strength
Rp0,2 MPa
min./max.
Tensile strength
Rm MPa
min./max.
Elongation
A50
mm %
min.
Elongation
A %
min.
Bending radius
180° t
min.
Bending radius
90° t
min.
0,2 - 0,5273590 - 130170 t0 t
0,5 - 1,5273590 - 130190 t0 t
1,5 - 3273590 - 130210 t0 t
3 - 6273590 - 130241,0 t1,0 t
6 - 12,5273590 - 130281,5 t
12,5 - 50273590 - 13025

Heat-treated condition H22 | EN AW 3103A

Mechanical properties

Nominal thickness
mm
Brinell hardness
HBW
Yield strength
Rp0,2 MPa
min./max.
Tensile strength
Rm MPa
min./max.
Elongation
A50
mm %
min.
Elongation
A %
min.
Bending radius
180° t
min.
Bending radius
90° t
min.
0,2 - 0,53675115 - 15561,0 t0 t
0,5 - 1,53675115 - 15571,0 t0,5 t
1,5 - 33675115 - 15581,0 t1,0 t
3 - 63675115 - 15591,0 t
6 - 12,53675115 - 155112,0 t

Heat-treated condition H24 | EN AW 3103A

Mechanical properties

Nominal thickness
mm
Brinell hardness
HBW
Yield strength
Rp0,2 MPa
min./max.
Tensile strength
Rm MPa
min./max.
Elongation
A50
mm %
min.
Elongation
A %
min.
Bending radius
180° t
min.
Bending radius
90° t
min.
0,2 - 0,544110140 - 18041,5 t0,5 t
0,5 - 1,544110140 - 18041,5 t1,0 t
1,5 - 344110140 - 18051,5 t1,0 t
3 - 644110140 - 18062,0 t
6 - 12,544110140 - 18082,5 t