tk accelis
Processing Europe
Processing Europe
/thyssenkrupp_logo_claim_d.svg){kind=logo}
/thyssenkrupp_logo_t.svg){kind=logo}
EN AW 3105A | Al Mn0.5Mg0.5
On this page you can find the chemical and mechanical specifications of the alloy EN AW 3105A | Al Mn0.5Mg0.5.
Other dimensions and alloys are available on request.
Our aluminum specialists in Mannheim are happy to advise you. EN AW 3105A - send request!
Chemical composition [% max. or range]
| Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn | Ti | Ga | V |
| 0.7 | 0.8 | 0.3 | 1.0–1.5 | 0.20–0.6 | 0.1 | — | 0.4 | 0.1 | — | — |
EN AW 3105A | Al Mn0.5Mg0.5: Heat-treated condition 0/H111
Mechanical properties
| Nominal thickness mm | Brinell hardness HBW | Yield strength Rp0,2 MPa min./max. | Tensile strength Rm MPa min./max. | Elongation A50 mm % min. | Elongation A % min. | Bending radius 180° t min. | Bending radius 90° t min. |
| 0.2 - 0.5 | 29 | 40 | 100 - 155 | 14 | 0 t | ||
| 0.5 - 1.5 | 29 | 40 | 100 - 155 | 15 | 0 t | ||
| 1.5 - 3 | 29 | 40 | 100 - 155 | 17 | 0.5 t |
EN AW 3105A | Al Mn0.5Mg0.5: Heat-treated condition H22
Mechanical properties
| Nominal thickness mm | Brinell hardness HBW | Yield strength Rp0,2 MPa min./max. | Tensile strength Rm MPa min./max. | Elongation A50 mm % min. | Elongation A % min. | Bending radius 180° t min. | Bending radius 90° t min. |
| 0.2 - 0.5 | 41 | 105 | 130 - 180 | 6 | |||
| 0.5 - 1.5 | 41 | 105 | 130 - 180 | 6 | |||
| 1.5 - 3 | 41 | 105 | 130 - 180 | 7 |
EN AW 3105A | Al Mn0.5Mg0.5: Heat-treated condition H24
Mechanical properties
| Nominal thickness mm | Brinell hardness HBW | Yield strength Rp0,2 MPa min./max. | Tensile stregth Rm MPa min./max. | Elongation A50 mm % min. | Elongation A % min. | Bending radius 180° t min. | Bending radius 90° t min. |
| 0.2 - 0.5 | 47 | 120 | 150 - 200 | 4 | 2.5 t | ||
| 0.5 - 1.5 | 47 | 120 | 150 - 200 | 4 | 2.5 t | ||
| 1.5 - 3 | 47 | 120 | 150 - 200 | 5 | 2.5 t |