You are using Internet Explorer 11 or earlier, this browser is no longer supported by this website. We suggest to use a modern browser.

Aluminum

EN AW 6063 | Al Mg0,7Si(A)

On this page you can find the chemical and mechanical specifications of the alloy EN AW 6063 | Al Mg0,7Si(A).

Other dimensions and alloys are available on request.

Our aluminum specialists in Wörth are happy to advise you. We look forward to hearing from you.

Chemical composition [% max. oder range]

SiFeCuMnMgCrNiZnTiGaV
0.2 - 0.60.350.10.100.45–0.90.10.100.10

Heat-treated condition O | EN AW 6063

Mechanical properties

Nominal thickness mmBrinell hardness HBWYield strength Rp0,2 MPa min./max.Tensile strength Rm MPa min./max.Elongation A50 mm % min.Elongation A % min.Bending radius 180° t min.Bending radius 90° t min.
0.5 - 6.0-6580-14023-00

Heat-treated condition T4 | EN AW 6063

Mechanical properties

Nominal thickness mmBrinell hardness HBWYield strength Rp0,2 MPa min./max.Tensile strength Rm MPa min./max.Elongation A50 mm % min.Elongation A % min.Bending radius 180° t min.Bending radius 90° t min.
0.5 - 6.0-4012020-00