You are using Internet Explorer 11 or earlier, this browser is no longer supported by this website. We suggest to use a modern browser.

Aluminum

EN AW 5052 | Al Mg2,5

On this page you can find the chemical and mechanical specifications of the alloy EN AW 5052 | Al Mg2,5.

Other dimensions and alloys are available on request.

Our aluminum specialists in Wörth are happy to advise you. We look forward to hearing from you.

Chemical composition [% max. or range]

SiFeCuMnMgCrNiZnTiGaV
0,40,50,10,50–1,11,6–2,50,30,20,1

Heat-treated condition 0/H111 | EN AW 5052

Mechanical properties

Nominal thickness
mm
Brinell hardness
HBW
Yield strength
Rp0,2 MPa
min./max.
Tensile strength
Rm MPa
min./max.
Elongation
A50
mm %
min.
Elongation
A %
min.
Bending radius
180° t
min.
Bending radius
90° t
min.
0,2 - 0,54765170 - 215120 t0 t
0,5 - 1,54765170 - 215140 t0 t
1,5 - 34765170 - 215160,5 t0,5 t
3 - 64765170 - 215181,0 t
6 - 12,54665165 - 215192,0 t
12,5 - 804665165 - 21518

Heat-treated condition H14 | EN AW 5052

Mechanical properties

Nominal thickness
mm
Brinell hardness
HBW
Yield strength
Rp0,2 MPa
min./max.
Tensile strength
Rm MPa
min./max.
Elongation
A50
mm %
min.
Elongation
A %
min.
Bending radius
180° t
min.
Bending radius
90° t
min.
0,2 - 0,569180230 - 2803
0,5 - 1,569180230 - 2803
1,5 - 369180230 - 2804
3 - 669180230 - 2804
6 - 12,569180230 - 2805
12,5 - 2569180230 - 2804

Heat-treated condition H22 | EN AW 5052

Mechanical properties

Nominal thickness
mm
Brinell hardness
HBW
Yield strength
Rp0,2 MPa
min./max.
Tensile strength
Rm MPa
min./max.
Elongation
A50
mm %
min.
Elongation
A %
min.
Bending radius
180° t
min.
Bending radius
90° t
min.
0,2 - 0,561130210 - 26051,5 t0,5 t
0,5 - 1,561130210 - 26061,5 t1,0 t
1,5 - 361130210 - 26071,5 t1,5 t
3 - 661130210 - 260101,5 t
6 - 12,561130210 - 260122,5 t
12,5 - 4061130210 - 26012

Heat-treated condition H24 | EN AW 5052

Mechanical properties

Nominal thickness
mm
Brinell hardness
HBW
Yield strength
Rp0,2 MPa
min./max.
Tensile strength
Rm MPa
min./max.
Elongation
A50
mm %
min.
Elongation
A %
min.
Bending radius
180° t
min.
Bending radius
90° t
min.
0,2 - 0,567150230 - 28042,0 t0,5 t
0,5 - 1,567150230 - 28052,0 t1,5 t
1,5 - 367150230 - 28062,0 t2,0 t
3 - 667150230 - 28072,5 t
6 - 12,567150230 - 28093,0 t
12,5 - 2567150230 - 2809

Heat-treated condition H26 | EN AW 5052

Mechanical properties

Nominal thickness
mm
Brinell hardness
HBW
Yield strength
Rp0,2 MPa
min./max.
Tensile strength
Rm MPa
min./max.
Elongation
A50
mm %
min.
Elongation
A %
min.
Bending radius
180° t
min.
Bending radius
90° t
min.
0,2 - 0,574180250 - 30031,5 t
0,5 - 1,574180250 - 30042,0 t
1,5 - 374180250 - 30053,0 t
3 - 674180250 - 30063,5 t

Heat-treated condition H28 | EN AW 5052

Mechanical properties

Nominal thickness
mm
Brinell hardness
HBW
Yield strength
Rp0,2 MPa
min./max.
Tensile strength
Rm MPa
min./max.
Elongation
A50
mm %
min.
Elongation
A %
min.
Bending radius
180° t
min.
Bending radius
90° t
min.
0,2 - 0,5812102703
0,5 - 1,5812102703
1,5 - 3812102704