DD11 | 1.0332

DD11 is a basic grade and is well suited for forming and welding. It is recommended that products made from DD11 steel grade should be formed within 6 weeks from the date of supply.

DD11 - send request!

Mild non-alloy steel for cold forming

DD11 | 1.0332: Properties according to DIN EN 10 111

Steel type

Short designation	VDA239-100	Material number
DD11	-	1.0332

DD11 | 1.0332: Mechanical properties (transverse)

Lower yield strength 1) MPa ReL		Tensile strength Rm MPa max.	Elongation at fracture A80 % min.			Elongation at fracture A 5% min.
1.0 mm ≤ e < 2 mm	2 mm ≤ e < 11 mm		1.0 mm ≤ e < 1.5 mm	1.5 mm ≤ e < 2 mm	2 mm ≤ e < 3 mm	3 mm ≤ e < 11 mm
170-360	170–340	440	22	23	24	28

DD11 | 1.0332: Chemical composition (heat analysis)

Percentage by weight % max.
C	Mn	P	S
0.12	0.60	0.045	0.045

Your product of choice: DD11 | 1.0332

Send request!

1) Where the upper yield strength is not defined, Rp_0.2 shall be applicable instead of R_eL.