You are using Internet Explorer 11 or earlier, this browser is no longer supported by this website. We suggest to use a modern browser.

scalur®+Z

scalur®+Z

scalur®+Z from thyssenkrupp is a hot-dip galvanized flat product with extremely close thickness tolerances down to ± 0.06 mm over the entire strip length and width. The uniform properties of scalur®+Z ensure maximum yield in production, with excellent processing characteristics for consistently high product quality. Depending on the strength grade involved, scalur®+Z is available in thicknesses of 1.50 to 4.00 mm and widths of 900 to 1,550 mm. It is particularly suitable for stampings, sections and telescopic rails.

Benefit from various scalur®+Z grades from the spectrum of micro-alloyed steels, mild unalloyed steels and general structural steels according to DIN EN 10346.

scalur®+Z products are available with surface finish A (normal surface) and B (improved surface) according to DIN EN 10346. Surface treatments O (oiled - lightly, normally or heavily oiled), C (chemically passivated) and CO (chemically passivated and oiled) are available for scalur®+Z on request.

The experts at our locations are happy to advise you. We look forward to hearing from you.

Overview steel types

Click on your desired steel type for more details:

GradesMaterial number
scalur®+Z DX51D - DX52D1.0917 - 1.0918
scalur®+Z S220GD - S350GD1.0241 - 1.0529
scalur®+Z HX260LAD - HX500LAD1.0929 - 1.0991

DIN standards

DIN EN 10346