You are using Internet Explorer 11 or earlier, this browser is no longer supported by this website. We suggest to use a modern browser.

Electrolytically zinc-coated sheet

HC460LA+ZE | 1.0574

Grade HC460LA+ZE belongs to the electrolytically zinc-coated sheets and has a 0.2% yield strength of around 460 MPa.

Micro-alloyed steel

Properties according to DIN EN 10 268

Steel type

Short designationVDA239-100Surface finishMaterial number
HC460LACR420LA+ZE1.0574

Mechanical properties (transverse)

Proof stress Rp 0,21) MPaTensile strength Rm MPaElongation at2)
fracture A80 % min.
460–580510–66013

Chemical composition (heat analysis)

Percentage by weight % max.
CSiMnPSAITi6)Nb6)
0.140.61.80.030.0250.0150.150.09

1) Where a yield strength is defined, the respective values shall apply to the lower yield strength (ReL)

2) For thicknesses ≤ 0.7 mm but > 0.5 mm, the minimum elongation at fracture may be 2 units lower. For thicknesses ≤ 0.5 mm, the minimum elongation at fracture may be 4 units lower.

6) Additions of vanadium and boron are also permissible. The total content of all four elements must not exceed 0.22 % .